Keywords: asphalt track, switches and crossings, vehicle-track interaction, finite element method.

Switches and crossings are a critical part of railway infrastructure and have a complex superstructure, creating variable support and bending stiffness along the track length. These variable structural and loading effects lead to faster rates of track geometry deterioration compared with plain line. Multibody vehicle-track interaction and finite element models combined with empirical predictions have been used to assess the likely benefits and improvements of using an asphalt layer combined with reduced ballast depth under S&C, in terms of long-term ballast differential settlement as well as in terms of reducing stress levels within the ballast and the subgrade layers. The assessment is primarily comparative against a baseline scenario site without asphalt layer. The introduction of asphalt track configurations reduced the variation in trackbed stiffness and increased stiffness throughout the switch panel. Using stresses calculated from finite element modelling, the ballast settlement was calculated using a semi-empirical equation to account for higher load cycles. The introduction of the asphalt layer reduced both maximum and differential settlements, originating from the ballast layer, in the switch panel with respect to the baseline scenario. Furthermore, the maximum stresses transmitted to the subgrade are generally reduced for both asphalt thicknesses with respect to the baseline.

download the full-text of this paper (PDF, 8 pages, 707 Kb)

go to the previous paper
go to the next paper
return to the table of contents
return to the volume description